It is not only important to have in place the necessary amount of fire safety equipment in a commercial complex, but it is also equally important for some members of that fraternity to actually undergo some sort of fire safety training.

The most common workplace emergency is fire. The best way to prevent injuries and deaths from fires is to prevent fires in the first place. According to the Occupational Safety and Health Administration, more than 75,000 workplace fires and related explosions occur each year.

All companies should create a basic fire prevention plan for fire safety, which includes a list of the major workplace fire hazards and proper handling and storage procedures for those materials. The plan should also cover potential ignition sources, such as welding and smoking and related control procedures, as well as discuss the type of fire protection equipment or systems which can control fire. The fire prevention plan must include the names and/or regular job titles of that personnel responsible for maintenance of fire systems and that personnel responsible for control of fuel source hazards.

Dangers of fire include heat, smoke, and toxic gases which all present some very nasty consequences for the personal welfare and life safety of individuals exposed to fire.

Fire safety can include engineered controls, like fire sprinklers, fire alarms, and smoke detectors are mandatory for many modern structures and likely exist where you work.

To know more  - Vivid Learning Systems.

First of all, in order to eliminate fire hazards, you have to know what to look for. Take the time to perform a workplace hazard assessment where you can search for and the document is known hazards. Once hazards have been identified, you’ll then be able to either control them if they are unavoidable or eliminate them altogether. Consider the following:

1) Always practice good housekeeping. Keep work areas free of clutter and combustible  waste.

2) Make sure any heat-producing equipment (including office equipment like copiers or coffee makers) are kept away from materials that could burn.

3) 39 percent of workplace fires are electrical. Ensure electrical cords are in good   condition. Remove equipment from service if wires are found exposed or damaged until   they have been repaired or replaced.

4) Check that power outlet are not overloaded and that outlets and extension cords are   capable of handling the voltage of connected equipment.

5) Be on the lookout for equipment that overheats or gives off a burning odor.

6) When plugging equipment into an outlet, the plug should correspond with the outlet;   that is to say, do not plug a two-prong plug into a three-slot outlet.

7) Store flammable work materials and chemicals in a safe location away from any   ignition sources.

8) Communicate to all employees the hazards of smoking on site. Designate smoking   areas outside and away from building entrances.

If you see a fire break out, immediately sound the nearest alarm to alert other employees in the building and then determine your next step. If the fire is small and controllable and you are trained in the use of a fire extinguisher, you may attempt to extinguish the fire. Be sure to leave yourself a clear escape route and know how to recognize when the fire grows out of your control. Instruct a nearby employee to dial 911 if your alarm system is not equipped to automatically communicate with local emergency responders...to know more, visit - Safety services company.

The primary function of fire detection and alarm system is to give an early warning of fire in a building or premises in order to ensure the safety of the occupants by alerting them of the danger of fire, therefore, increasing the time available to escape to safety or by initiation of other emergency actions.

The secondary function is to reduce the loss of, or damage to, property by ensuring the early detection and therefore increasing the possibility of extinguishing the fire before it takes control.

Therefore it is essential to have a fully functioning Fire Alarm Detection System and to make sure that this system is tested, serviced and maintained on a regular basis...know more by visiting - Apexfire.

1) Keep exit routes free of all clutter, equipment, locked doors and dead-end corridors.

2) Be sure to keep highly flammable furnishings and decorations at a safe distance from   emergency exits.

3) Arrange exit routes so employees will not have to travel past high-hazard areas unless 

 absolutely necessary.

4) Post signs along the walls indicating safe evacuation routes and be sure paths are   well-lit.

5) Clearly, label doors that can be mistaken for an exit with a sign reading “Not an exit” or   indicating the room’s use, such as “Closet.”

6) Renew fire-retardant paints and solutions when needed.

7) Maintain safe exit routes during construction, maintenance and repairs.

Read more at - Safety and health.

Fire safety is very important for people to know and be aware of. Metrofire can help people know about the importance of fire safety and emergency response training.